Planet Technology WDAP-2000PE Bedienungsanleitung PDF herunterladen (Seite 8)

Installation

Rear View

Connector Description

ANT

Two dipole antennas are supplied. Best result is usually

obtained with the antenna in a vertical position.

Power

Connect the supplied power adapter here.

Reset Button

In order to clear ALL settings and restore to factory

default, holding the Reset Button down continuously for 5

seconds.

LAN (PoE)

Use a standard LAN cable (RJ-45 connectors) to connect

this port to a 10BaseT or 100BaseT hub on your LAN.

1.4 Specification

Model WDAP-2000PE

Standard IEEE 802.11b, 802.11g, 802.11a

Signal Type DSSS (Direct Sequence Spread Spectrum)

Modulation

OFDM with BPSK, QPSK, 16QAM, 64QAM, DBPSK, DQPSK,

CCK

Port 10/100Mbps RJ-45 port * 1, 802.3af compliant

Antenna Connector Reverse SMA male x 2

Wireless Transmit

Power

IEEE802.11a mode: 17dBm@54Mbps

20dBm@6Mbps

IEEE802.11g mode: 17dBm@54Mbps

20dBm@11Mbps

20dBm@1Mbps

IEEE802.11b mode: 14dBm

Wireless Receive

Sensitivity

IEEE802.11a mode: -85dBm@6Mbps

-65dBm@54Mbps

IEEE802.11g mode: -91dBm@1Mbps

-84dBm@11Mbps

-65dBm@54Mbps

Operating Mode AP, WDS mode

Security

WEP, WPA with PSK/TKIP/AES support

802.1x authentication /EAP-TLS/EAP-TTLS/EAP-MD5/EAP-

PEAP

MAC filtering authorized

Block SSID broadcast

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 52 53

Kommentare zu diesen Handbüchern

Keine Kommentare

Planet Technology WDAP-2000PE Bedienungsanleitung Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für WLAN-Zugangspunkte Planet Technology WDAP-2000PE