Planet Technology WAP-4035 Bedienungsanleitung

54Mbps Wireless Access Point With 5-Port Switch WAP-4035 User’s Manual

Chapter 2 Hardware Installation Before you proceed with the installation, it is necessary that you have enough information about the WAP-4035. 1. Lo

Chapter 3 Web Configuration Web configuration provides a user-friendly graphical user interface (web pages) to manage your WAP-4035. An AP with an ass

3.2 Basic Setting In this screen, you can configure WAP-4035 to work in different operating mode. Please refer to below sections to know the details c

Parameter Description Mode Shows the current operation mode. Band 2.4GHz (B): It forces the WAP-4035 to operate in 802.11b only. 2.4GHz (G): It for

3.2.2 Station - Ad Hoc Mode WAP-4035 serves as a wireless station (Ad-hoc) in this mode. Connected to a PC or a small LAN (no more than 5 PCs), thi

Band 2.4GHz (B): It forces the WAP-4035 to operate in 802.11b only. 2.4GHz (G): It forces the WAP-4035 to operate in 802.11g only. 2.4GHz (B+G): It al

Parameter Description Mode Shows the current operation mode. Band 2.4GHz (B): It forces the WAP-4035 to operate in 802.11b only. 2.4GHz (G): It f

Parameter Description Mode Shows the current operation mode. Band 2.4GHz (B): It allows to select the transmit rate up to 11Mbps. 2.4GHz (G): It

3.2.5 AP Bridge - Point to Multipoint Mode This function allows WAP-4035 to bridge more than 2 wired Ethernet networks together by wireless connectio

3.2.6 AP Bridge - WDS Mode If you want WAP-4035 to bridge to other WAP-4035 and provide access for other wireless clients at the same time, you have

Copyright Copyright © 2005 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, s

Channel 1-13 (Europe) Associated Clients You may press “Show Active Clients” button to check the connected client information. After the button pre

Parameter Description Mode Shows the current operation mode. Band 2.4GHz (B): It allows to select the transmit rate up to 11Mbps. 2.4GHz (G): It

You may press “Refresh” to get the new client table or “Close” to close this dialog box. WLAN MAC Keep default setting: WAP-4035 will use it’s own MA

Parameter Description Encryption You can select “None”,“WEP 64bits”, “WEP 128bits”, “WPA (TKIP)” or “WPA2 (AES)” of this option . It is set to “None

After configuration complete, please click “Apply” button to save the configuration. Then you will see a screen to prompt you the settings are save su

The access point will use the highest possible selected transmission rate to transmit the data packets. Preamble Type Preamble type defines the lengt

3.4.1 WEP When you select 64-bit or 128-bit WEP key, you have to enter WEP keys to encrypt data. You can enter four WEP keys and select one of them

Parameter Description Encryption Select “WEP” in this option. Key Length You can select the 64 or 128-bit key to encrypt transmitted data. Larger W

Parameter Description Encryption If you want to use 802.1x only, keep this setting in “Disable”. Enable 802.1x Authentication Check this option to

Parameter Description Encryption Select “WPA pre-shared key” in this option. WPA (TKIP) TKIP can change the encryption key frequently to enhance

interference received, including interference that may cause undesired operation. Federal Communication Commission (FCC) Radiation Exposure Stateme

Parameter Description Encryption Select “WPA RADIUS” in this option. WPA (TKIP) TKIP can change the encryption key frequently to enhance the wir

accounts to login to the Access Point before access the wireless LAN. You also have to add secret key to the RADIUS server. RADIUS server client has t

authenticate wireless LAN users. Authentication client information includes the “Client IP” and “Secret Key”. An authentication client has to use the

Enable Wireless Access Control Enable or disable the MAC Address Filtering function. Add MAC address into the table In the bottom “New” area, fil

Parameter Description Password Settings Current Password Enter the current password (up to 15-digit alphanumeric string) of the Access Point. The

resides in. It allows this access point be accessed by PC from deferent subnet to do configuration. DHCP Server Enable or disable the DHCP Server. DH

3.9 Upgrade This page allows you to upgrade WAP-4035 with latest firmware. Parameter Description Firmware Upgrade To upgrade the firmware of WAP-

process is complete, we suggest you to power off/on WAP-4035 to make the newfirmware effect. 3.10 Reset You can reset the WAP-4035 system if necess

Appendix A Specification Standard IEEE 802.11g / 802.11b Frequency Band 2.400~2.4835GHz Transfer Rate 802.11g: 54/48/36/24/18/12/9/6Mbps 802.11b: 1

Appendix B Frequently Ask Question This chapter provides answer to problems usually encountered during the installation and operation of the Wireless

Revision User’s Manual for PLANET Wireless Access Point with 5-Port Switch Model: WAP-4035 Rev: 1.0 (August, 2005) Part No. EM-WAP4035 4

Q. When WAP-4035 works with WDS mode, can wireless connect to it? A. Yes, WDS mode is work as a AP and Bridge at the same time. So the wireless clie

TABLE OF CONTENTS Chapter 1 Introduction ...7 1.1 Package Contents...

Appendix A Specification...38 Appendix B Frequently Ask Question...

Chapter 1 Introduction Thank you for purchasing WAP-4035. The WAP-4035 supports both IEEE 802.11b and IEEE 802.11g standards. You can use it to connec

 Web-based configuration 1.3 LED Indicators LED Color Function PWR Green Off: Power is not connected On: Device is ready Blink: During boot up

the coverage. Please check the specification of the antenna you want to use, and make sure it can be used on WAP-4035. 4. WLAN Type If WAP-4035 is i