Planet Technology WAP-4030 Bedienungsanleitung

Wireless Access Point WAP-4030 User’s Manual

6 3.2 Radio Setting In this option, you can set the wireless settings such as SSID and RF Channel to this Access Point. When configuration finish

7 Parameters Description Service Set ID (SSID) The SSID (up to 32 printable ASCII characters) is the unique name identified in a WLAN. The ID preve

8 Please make sure your wireless stations use the same security function. Parameters Description WPA Mode Disabled: Disable WPA-PSK WPA-PSK: Enabl

9 the authentication phase to associate with this access point. If you select “Both”, the wireless client can associate with this access point by us

10 Access Point. Confirm New Password Reconfirm the password you want to login to the Access Point. IP Address Designate the Access Point’s IP Add

11 Parameters Description Accept Association If this option is selected, all wireless stations can associate to this AP. If uncheck

12 from any station this option, only the wireless clients in the MAC Address list are allowed. MAC Address Table This table records the MAC addres

13 Chapter 4 Troubleshooting This chapter provides answer to problems usually encountered during the installation and operation of the Wireless Netw

2 Copyright Copyright ã 2004 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribe

3 interference received, including interference that may cause undesired operation. Federal Communication Commission (FCC) Radiation Exposure Stat

4 TABLE OF CONTENTS Chapter 1 Introduction 1 1.1 Package Contents 1 1.2 System Requirements 1 1.3 Features 1 1.4 Specification 2 1.5 Wireless

1 Chapter 1 Introduction Thank you for purchasing WAP-4030. This device is an access point for IEEE 802.11g 2.4GHz wireless network. You can use thi

2 1.4 Specification Standard IEEE 802.11g / 802.11b Frequency Band 2.400~2.4835GHz Transfer Rate 802.11g: 54/48/36/24/18/12/9/6Mbps 802.11b: 11/5.

3 1.5 Wireless Performance The following information will help you utilizing the wireless performance and operating coverage of WAP-4030. 1. Site s

4 Chapter 2 Hardware Installation Before you proceed with the installation, it is necessary that you have enough information about the WAP-4030. 2.

5 Chapter 3 Configuring the Wireless AP Web configuration provides a user-friendly graphical user interface (web pages) to manage your WAP-4030. An