Planet Technology WAP-4030 Bedienungsanleitung PDF herunterladen (Seite 8)

Chapter 2 Hardware Installation

Before you proceed with the installation, it is necessary that you have enough information about the

WAP-4030.

2.1 Hardware Connection

12V DC

LAN

RESETANT

1. Locate an optimum location for the WAP-4030. The best place for your WAP-4030 is usually

at the center of your wireless network, with line of sight to all of your mobile stations.

2. Assemble the antennas to WAP-4030. Try to place them to a position that can best cover your

wireless network. The antenna’s position will enhance the receiving sensitivity.

3. Connect RJ-45 cable to WAP-4030. Connect this WAP-4030 to your LAN switch/hub or a single

PC.

4. Plug in power adapter and connect to power source. After power on, WAP-4030 will start to

work.

Note: ONLY use the power adapter supplied with the WAP-4030. Otherwise, the product may be

damaged.

If you want to reset your WAP-4030 to default settings, press the Reset button 5 second.

And then wait for 10 seconds for WAP-4030 restart.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 16 17

Keine Kommentare

Planet Technology WAP-4030 Bedienungsanleitung Seite 8