Planet Technology WAP-1966 Bedienungsanleitung PDF herunterladen (Seite 23)

- 18 -

Antenna Transmit power: Used to control the transmit power of the WAP-1966. Four

options are available: 100%, 50%, 25% and 12.5%.

3.2.2.3 IP Settings

DHCP: DHCP is a protocol for dynamically assigning IP addresses to networked computers. With

DHCP, a computer can automatically be given an exclusive IP address each time it logs on to a

network--making IP address management an easier job for network administrators. When a

computer connects to the network, the DHCP server selects an IP address from a master list and

assigns it to the system. The device must set to "Obtain the IP address automatically". The Wireless

Access Point ‘s DHCP server is disabled by default. If you would like to enable the DHCP server,

check the “DHCP server” option.

Fix IP Address: You may give a fixed IP address to WAP-1966 manually by choosing this radio

button.

IP Address: Set an IP address for the AP.

Subnet mask: Set the Subnet Mask for the AP.

Gateway: The IP address of a gateway device necessary for communication with devices

outside the subnet of the Access Point. If your network is not divided onto different subnets, this

can remain blank.

DHCP Client: If there is a DHCP Server in your LAN, you can select DHCP Client to let the

WAP-1966 be a client to get an IP address from your DHCP server.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 56 57

Keine Kommentare

Planet Technology WAP-1966 Bedienungsanleitung Seite 23