Planet-technology VDSL2 VC-200M Bedienungsanleitung

VDSL2 Router VC-200M / VC-200S User's Manual

10and phone through a twisted-pair phone wire.

Chapter 2: Hardware Installation This chapter offers information about installing your router. If you are not familiar with the hardware or software p

12 Step 2. Connect a Workstation to the Router&

133. In the Local Area Connection Status windo

142.3.2 Configuring PC in Windows 2000 1. Go

15 2.3.3 Configuring PC in Windows 98/Me 1.

16 5. Select the Disable DNS radio button and c

17 Note: By factory default: DHCP is disabled,

Chapter 3: Configuration 3.1 Determine your connection settings Before you configure the router, you need to know the connection information supplied

19 3.4 Quick Installation There are two device

2Copyright Copyright© 2007 by PLANET Technology

20 Step2- Select profile in VC-200M and VC-200

21 Step4- After successful connect between VC-2

22Router Mode Step1- Click “Router Mode” in V

23 Step3- Select WAN IP address, e.g. we set W

24Step4- Fill in WAN IP address, e.g.VC-200M is

25Step6- Click “Active” to make the connection

263.5 Configuration Menu for Administrator The

27z WAN z LAN z NAT z Route z UPnP 3.5.3

28 3.5.3.1 Host Name Config To configure System

293.5.3.2 System Time To configure the system t

3FCC Caution: To assure continued compliance

30 While adding a user, each user must be assig

31 3.5.3.5 Firmware Upgrade To update the syste

323.5.3.6 System Status To view system status,

33 The screen contains the following details: F

343.5.3.8 Reset To restart the system, click o

35 3.5.4.1 Dynamic IP To configure the WAN in

36 The screen contains the following details: z

37 The Screen contains the following details: F

38The screen contains the following details: Fi

39 3.5.4.4 DNS Domain Name Service (DNS) stor

4Revision User’s Manual for VDSL2 Router Model:

40z Click “APPLY” to save the information that

41 The screen contains the following details: F

423.5.5.2 DHCP Client List To view the DHCP c

43 3.5.6.1 Virtual Server You can configure t

44 The screen contains the following details: F

45The screen contains the following details: Fi

46Enable Enable or disable the DMZ setting o

47 The screen contains the following details: F

48 PC2 can go to Internet through VDSL2 ROUTER,

493.5.8 UPnP UPnP (Universal Plug and Play) i

5Table of Contents CHAPTER 1: INTERDUCTION...

50The screen contains the following details: Fi

Chapter 4: Operating the VDSL2 System 4.1 Configuration Settings Configure and start the VC-200M and the CPE. z Configuration: As a minimum configu

52Setting Description Direction To which dire

53This is a marginal situation. There might be

54services. Unlike its predecessor, which allow

55 Setting Description Profile Select the te

56 The screen contains the following details: S

57 4.1.6 Version Information To view the versio

Appendix A: Throughput Test for VDSL2 profiles Router Mode Bridge Mode Short distance UP Down UP Down 1 8a-Bandeplan ITU AnnexA_M1_EU32 5M 20M 10M

59Appendix B: Glossary DHCP DHCP stands for Dy

63.5.5.1 LAN Setting...

60Internet Service Provider. An ISP is a busine

61TCP/IP Transmission Control Protocol/Interne

Chapter 1: Introduction The PLANET VDSL2 Router, VC-200M / VC-200S is based on two core networking technologies: Ethernet and VDSL2 (Very High Speed D

8 Universal Plug and Play (UPnP) UPnP allows

9 Front Panel LED definition LED State Desc