Planet-technology XRT-501 Bedienungsanleitung PDF herunterladen (Seite 3)

1. Requirements

l DSL or Cable modem for broadband Internet access.

l Network cables. Use standard 10/100/1000Base-T network (UTP) cables with

RJ45 connectors.

l TCP/IP network protocol installed on each PC.

2. Before Startup

2.1 Physical Installation

Setupyournetworkasshowninthesetupdiagrambelow

1.Use standard LAN cables to connect PCs to the Switching Hub ports on the

XRT-501, or you can directly connect PCs to XRT-501, you may use 10Base-T,

100Base-TX, or 1000Base-T connections, and all connection types can be used

simultaneously.

2.If required, connect any port to a normal port on another Hub, using a stan

dard LAN cable. Any LAN port on the XRT-501 will automatically function as an

“Uplink” port when required.

3. Connect the DSL or Cable modem to the WAN port on the XRT-501. Use the

cable supplied with your DSL/Cable modem. If no cable was supplied, use a

standard cable.

4. Connect the supplied Power Adapter and power on.

5. Check the LEDs

1 2 3 4 5 6 7 8 ... 15 16

Keine Kommentare

Planet-technology XRT-501 Bedienungsanleitung Seite 3